Important Steps for Installing a New Shower Unit

Call Today

Everybody maintains his or her own conception in relation to Simple ways to Install a Shower Cubicle on Your Own.

An effective shower setup needs careful planning and a great deal of work. Most of the times, you will require to do three types of tasks: framing wall surfaces, mounting the plumbing, and ending up wall surfaces.

Preparation

To start with, you should choose the kind of shower that you desire to mount. It is very important to establish whether the selected shower is capable of managing particular systems as well as can control a risk-free level of water through the central heating boiler. Many shower systems nowadays are created to be versatile to various water pressures (such as saved warm water and cold mains).
It is likewise crucial to take into consideration the water stress and also the planning of the piping and also water drainage for the shower

Various Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be attached to the bath tap based on your requirement, as well as the water temperature level can be changed by means of the faucets. Push-on mixers are cheap and also extremely easy to set up. However, although the hose link is easy, it is conveniently displaced. Furthermore, it is inconvenient to adjust the temperature level.

Bath/Shower Mixer: The tube as well as spray of this kind of shower are incorporated with a bath mixer faucet, and also the temperature level can be readjusted via the bathroom taps. It is an extremely low-cost choice as well as no added plumbing is included. Nonetheless, the bath/shower mixers likewise experience inconvenient temperature level control alternatives.

Manual Mixer: The hose pipe and also spray of a hand-operated mixer shower unit belong of the wall surface unit and the hot and cold water products are linked to a solitary shutoff The temperature and stress of the water are managed via either one or a range of knobs (in extra pricey showers). Although temperature control is much easier in hand-operated mixer kinds, they are extra pricey than the previously discussed mixers. They also call for added plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The hose pipe and spray of this shower type belong of the wall surface system and also the cold and hot water products are connected to a solitary valve below too. It is total with an integrated stabiliser to self-adjust the water temperature level and to avoid it from coming to be also warm. One of the biggest advantages of a thermostatic mixer shower type consists of practical temperature control. However, it is the most expensive of the various mixer choices.

Power Shower: A power shower is a single unit consisting of a powerful electric pump that is capable of modifying both the water pressure and also temperature level. This sort of shower can be fitted if there is supply of water from a cold water tank and also a warm water cyndrical tube. A power shower makes the change of both pressure and temperature simple. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a combination boiler under keys pressure.

Electric Shower: An electrical shower is plumbed into a mains cold water supply as well as it heats the water electrically. It is essential to note that for this shower kind to be set up, the mains pressure requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit enables the temperature level and also pressure to be readjusted via a handle. Designs with temperature level stabilisers are much better as they stay unaffected by other taps somewhere else being used within the family. A significant disadvantage of electric showers is that the control handle only enables the option of high temperatures at much less pressure, or reduced temperature levels at a better pressure. This is problematic in the winter when the spray is typically weak and also the keys water is cooler. Nevertheless, this problem is taken on in some models which are offered with a winter/summer setting.

Method

Depending on the type of shower you want to install, the shower head have to either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it must have a check shutoff.
Prior to beginning, it is advisable to note the positions of the shower head and also control, and also to intend the pipe-work entailed. In addition, the water drainage system to eliminate the drainage will certainly need to be planned. Both settings of the cable course and also the shower button will certainly likewise need to be thought about if an instant or electric shower device is being set up.
Use the instruction guide supplied with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is important to remove the water supply. In order to protect the pipelines, they ought to be provided a waterproof covering and also fitted with separating valves. The pipes can after that be hidden right into the wall surface and also glued over to neaten the overall look.
Fit the base tray, shower head, as well as installations.
Attach the main shower control to the pipes that will be supplying the water (This might require a women screw string adapter).
Reconnect the water and test the pipes for any kind of leaks, as some might need tightening.
If you are setting up an electric shower, remember to turn off the electrical energy supply prior to making any electrical links. When these links have actually been made (there should be assistance within the instruction manual), the power supply can be changed back on.

Adjusting Water Stress to Suit Your Shower

The cold water tank can be raised to a greater height (often just 150mm (6inches)) by fitting a strong wood support beneath it - potentially made up of struts and blockboards. If you choose this alternative, the main and also distribution pipes will certainly additionally have to be raised to satisfy the brand-new height of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it should be connected right into the power supply in order to run.

Piping as well as Drainage

It is best to make use of 15mm diameter supply pipelines, and also make the runs to the shower as brief and straight as possible so regarding preserve optimal pressure as well as reduce heat loss. Furthermore, by reducing making use of elbows for pipe corners, you can reduce the resistance in the flow of the water supply. You can achieve this by flexing the pipes rather.

Most Typical Errors

Going against or neglecting regional code constraints.

Using pipelines that are too tiny.

Attaching copper to galvanized without using a brass or dielectric suitable between both.

Not making use of tape or pipe compound at threaded joints.

Not leveling your components when mounting them.

Not installing an air space filling up for fixtures.

Cutting supply stub outs as well brief to mount the shutoff valves onto after the finished wall remains in place.

Not effectively straightening tubing into fittings or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will certainly create a leak.).

When turning the water back on in your house, always run the outdoors tube shutoff or purge your toilets to bleed dirt and air from the lines. This debris can trigger problems in your sink faucets and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm very excited about How to Install a Freestand and I really hope you liked the entire blog post. Liked our write up? Please share it. Help other people check it out. Thank you for your time. Come back soon.

Get A Free Estimate